Some extra luxuries if available at low prices may become heart delights. So don’t get bothered if you don’t love the sound of your V6 engine.
We are here to solve this problem. Through this informative piece of writing, you will know some easy tricks and tips that may help you to learn how to make a V6 sound like a V8. Applying one of these modifications on your V6 engine, you may get a sound that is much similar to the sound of a V8 engine.
How to make a V6 sound like a V8 ?
There lies a huge difference between both engine configurations. They work differently so their sound output is entirely varied from one another. Most of the V6 engine owners go for upgrading their existing V6 engines with a V8 engine configuration for better performance and better sound quality. the engine swapping is a good alternative, no doubt. But there are other choices as well that can work best to put a deep tone to your V6 engine.
Hence to save your time, let’s have a read and learn some simple modifications that may help you get what you want to.
Modify your existing exhaust system
This is perhaps the simplest and the most go-to modification that can work for your needs. Usually, V8 vehicles come with a dual exhaust system that delivers more aggressive and loud sound at higher rev. You can install an aftermarket dual exhaust system onto your V6 engine. It will help you make your V6 sound like a V8 as well as will improve the horsepower of your V6 vehicle.
Installing a dual exhaust system requires following these simple steps:
- Lift your V6 vehicle and unbolt your stock exhaust system by detaching it from the headers
- Install the new dual exhaust system and attach it to the headers
Replace the stock headers with aftermarket headers
Being an important component of the exhaust, headers attach the engine cylinders to the exhaust system. You can go for an upgrade by installing performance headers to the exhaust system of your v6 engine.
Aftermarket headers allow more air to flow to the exhaust. With more airflow, you will get a loud and aggressive exhaust note that is much like that of a V8 engine.
Putting new aftermarket performance headers is a square deal. All you need to do is:
- Locate the existing stock headers of your V6 engine
- Unbolt and remove them
- Place new aftermarket headers
You can go testing the sound of your V6 engine by spinning the key to ignition.
Replace the factory muffler with an aftermarket muffler
In many states, mufflers are a legal requirement. Mufflers are one of the major components of your vehicle’s exhaust system. If you are going to replace your V6 muffler with an aftermarket V8 muffler, you don’t need to replace the exhaust system.
Just remove your vehicle’s stock muffler with a performance muffler to make your V6 sound like a V8. Most of the V6 engine owners go for this modification as it is quite an easy and budget-friendly option.
Installing a performance muffler is a relatively simple job. Follow these instructions:
- Locate your car’s stock muffler
- Detach it from the exhaust system
- Put new muffler to the exact location
You can go for a straight-through muffler type if you want to get a deep and throaty rumble on your V6 engine. Although not the same as that of a V8 engine, yet replacing a stock muffler with a performance muffler can solve your problem.
But before you go for this modification, make it confirm that you abide by the laws of your state. Since in many states, removing a muffler from a vehicle is considered a breach breaking act. Your car-care provider will let you know which muffler type can work best on your V6 engine.
We hope that by far you will have learned how to make a V6 sound like a V8. Although people have underrated the sound of a V6 engine, yet there are a handful of modifications that may help you get a deep and throaty sound on your V6 engine trucks.
We hope you would have given a try to one of the above-mentioned steps to make your V6 sound behave like that of a V8. Do let us know if there are any other means that make a V6 sound like a V8.